Register reference
Addresses count from 0, with SunS at 40000. A value is the register times 10 to the power of its scale factor. Every name is the one in the SunSpec model.
Points
Section titled “Points”| Point | SunSpec name | Address | Type | Unit | Access | Notes |
|---|---|---|---|---|---|---|
1_Mn |
Manufacturer | 40004–40019 | string | – | read | C-Battery |
1_Vr |
Version | 40044–40051 | string | – | read | The software version |
704_WSetEna |
Set Active Power Enable | 40299 | enum16 | – | read/write | 1: the container is on. 0: off |
713_SoC |
State of Charge | 40348 | uint16 | %: register × 0.1 | read | |
713_Pct_SF |
Percent Scale Factor | 40352 | sunssf | – | read | −1 |
714_DCA |
DC Current | 40358 | int16 | A: register × 0.1 | read | Battery DC current |
714_DCW |
DC Power | 40359 | int16 | W: register × 100 | read | Positive discharges, negative charges |
714_DCA_SF |
DC Current Scale Factor | 40368 | sunssf | – | read | −1 |
714_DCW_SF |
DC Power Scale Factor | 40370 | sunssf | – | read | 2 |
802_WChaRteMax |
Nameplate Max Charge Rate | 40411 | uint16 | W: register × 100 | read | The charge power it can take now, not the nameplate |
802_WDisChaRteMax |
Nameplate Max Discharge Rate | 40412 | uint16 | W: register × 100 | read | The discharge power it can give now, not the nameplate |
802_WChaDisChaMax_SF |
Scale factor for maximum charge and discharge rate | 40461 | sunssf | – | read | 2 |
Models
Section titled “Models”Where each model starts today, to check your walk against.
| Model | SunSpec name | Starts at |
|---|---|---|
| 1 | Common | 40002 |
| 701 | DER AC Measurement | 40070 |
| 702 | DER Capacity | 40225 |
| 704 | DER AC Controls | 40277 |
| 713 | DER Storage Capacity | 40344 |
| 714 | DER DC Measurement | 40353 |
| 715 | DERCtl | 40398 |
| 802 | Battery Base Model | 40407 |
| End | – | 40471 |